top of page
Flag Logo-black-bkgd.png
SPI ForumAdd706-781-2220
misc-urethane-reducer.png

Urethane Reducer

prop65.webp

  • Available in Gallons, Medium and Slow available in quarts.

  • Very slow to Fast speeds

  • This is a top of the line reducer that can be used in any paint system calling for polyurethane or acrylic reducers

  • Not for sale in California

Low VOC Urethane Reducer

  • Same as our standard Urethane Reducers except 0 VOC for use in CA

  • Available in Gallons​

  • Slow to Fast speeds

  • This is a top of the line reducer that can be used in any paint system calling for polyurethane or acrylic reducers

misc-low-voc-urethane-reducer.png
prop65.webp
misc-waterborne-wg-remover.png

Waterborne WG Remover

prop65.webp

  • Available in Gallons or 5 Gallon Pails

  • 5 Gallon pails are available via freight order or local pick up only

  • Medium-dry WG remover designed with shops in mind

  • Can be used on fillers or anything porous as long as ample time is given to dry

  • Helps remove decal and pinstripe adhesives

  • Not for sale in California

Solvent WG Remover

  • Available in Gallons or 5 Gallon Pails

  • 5 Gallon pails are available via freight order or local pick up only

  • Medium-dry WG remover designed with shops in mind

  • Can be used on fillers or anything porous as long as ample time is given to dry

  • Helps remove decal and pinstripe adhesives

  • Not for sale in California

misc-solvent-wg-remover.png
prop65.webp
misc-urethane-retarder.png

Urethane Retarder

prop65.webp

  • Available in regular or Low VOC formulas

  • Available in Quarts Only

  • Great for all-overs in 80-100 degree temperatures

  • Helps to slow flash times, stop pin-holing, dry edges and dry spraying

  • 1-2oz per mixed quart of primer

  • 1-3oz per mixed quart of clear or single stage

  • Don’t use under 70 degrees

Polar Accelerator

  • Use to speed up dry times on any urethane or polyurethane clear

  • Will not cause dieback or create a hard to buff surface

  • Can be used in any 2k urethane primer as well

  • Use to speed up dry times on any urethane or polyurethane clear

  • Will not cause dieback or create a hard to buff surface

  • Can be used in any 2k urethane primer as well

misc-polar-accelerator.png
prop65.webp

Blending Solvent

  • Under 2.1 VOC

  • Ready to spray

  • Available in Quarts only

  • Use on TPO, TEO, PE, PP, UR, ABS etc.

  • “If it floats- Promote!” cut a sliver off the backside of the bumper or plastic, if it floats in the Adhesion Promoter then use Adhesion Promoter

  • 12 month sealed shelf life

  • Only prep the area with Waterborne WG remover, no solvent based cleaners

  • Ready to coat after 30 minutes, maximum 1 hour

  • Top coat with epoxy for best results, at minimum 2k primer

misc-blending-solvent.png
prop65.webp

Adhesion Promoter

  • Under 2.1 VOC

  • Ready to spray

  • Available in Quarts only

  • Use on TPO, TEO, PE, PP, UR, ABS etc.

  • “If it floats- Promote!” cut a sliver off the backside of the bumper or plastic, if it floats in the Adhesion Promoter then use Adhesion Promoter

  • 12 month sealed shelf life

  • Only prep the area with Waternorne WG remover, no solvent based cleaners

  • Ready to coat after 30 minutes, maximum 1 hour

  • Top coat with epoxy for best results, at minimum 2k primer

misc-adhesion-promoter.png
prop65.webp

Flattening Agent

  • Use to flatten clear coats and single stage paints

  • Available in Quarts only

  • Leftover product can be poured back in container when finished

  • 20-40% of activated material is typical for low sheen.

  • Allow first coat to flash 30 minutes

  • Do not spray back to back wet coats

  • “snowflakes” indicate too high air pressure, lower your normal pressure 5-10 psi

  • Not for sale in California

misc-flattening.png
prop65.webp
bottom of page