top of page
Adhesion Promoter

• Under 2.1 VOC

• Ready to spray

• Available in Quarts only

• Use on TPO, TEO, PE, PP, UR, ABS etc.

• "If it floats- Promote!" cut a sliver off the backside of the bumper or plastic, if it floats in the Adhesion Promoter then use Adhesion Promoter

• 12 month sealed shelf life

• Only prep the area with Waternorne WG remover, no solvent based cleaners

• Ready to coat after 30 minutes, maximum 1 hour

• Top coat with epoxy for best results, at minimum 2k primer


Technical Manual



bottom of page